Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

£9.9
FREE Shipping

Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

Sovol 2PCS Flexible Steel Build Plate Magnetic Base for ELEGOO Mars 2/ Mars 2 Pro/Creality LD-002H/ Nova3D Bene 4 LCD SLA Resin 3D Printer 140 x 84mm

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

To make it easier to remove the print, flexible surfaces can be used, with which the model can be easily removed by bending it. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average.

In addition to the classic print bed, you can also equip your device with special build plates and sheets, with which the filament adhesion to the printing platform is improved and warping is prevented. Zřejmě originální magnetická podložka z gumy je dost slabá, navíc mám tiskárnu s plochou 120×192 mm. Our build plate is made of aluminum alloy, ensuring that it is sturdy, durable, and non-deformable with good flatness, providing a stable and reliable platform for your 3D printing needs. Some mention that the magnetic part sticks well to the build plate, the adhesive is strong, and the backing sticks very well to it.If you choose to decline, then we will only use functional and analytical cookies and you will continue to see random advertisements. I had the problem with this design, that whenever i hung up the Buildplate the whole contrption would tip forward, thus creating a huge mess. you can quickly change the sheets without the need for multiple build platforms (a platform costs around 30 €, a sheet around 2 €). I also oriented the magnets with opposing polarity to force the magnetic flux to close though the steel sheet to get enough adhesion. Our build platform is equipped with a large non-slip hexagon socket screw for effortless leveling and remains stable and long-lasting level during printing.

I have tested this with my Mars 3 build plate, but if the mounts are the same as any of the other Elegoo machines, it will also work for those build plates as well. Then printer is going to make a horrible crack sound when the slip clutch of the motor is released, to prevent damage to its components . The steel plate grips the bed sheet fine and the tabs make it easy to remove once the prints complete, print adhere fine I’ve had not failures so far. Made of high quality aluminum alloy, it is non-deformation with good flatness, easy to install and clean, and durable for long-term use. The extra space when upgrade to magnetic print bed make the Z limit sensor not activate when homing.

That said, I imagine it might work well for printing many smaller minis, but for larger functional parts this wasn't good at all for me. One observation: my hypothesis I stated in a my previous experiments about surface reflectiveness affecting the size of elephant foot seem to be correct – with the shiny, nearly mirror-like surface I get much larger elephant foot. Awesome; trying to think of reasons why this hasnt been done yet; then again I dont think there is a reason why it hasnt been done on all fdm printer yet either; sometimes someone just has to do the obvious, to get the herd moving, and this seems like one of those cases. If, by chance, the print still sticks strong to the magnetic plate, it bends and you're left with a rounded bottom (top - depends on the point of view) surface of your print. I also replaced their logo with the Elegoo "e" on the front of the build plate as I think it fits better with the machine's design.

If you do not know this and just hit "home" -the printer tries to approach the absolute zero point with its platform. I scouted the Internet and found that, low and behold, if the build plate does not have a rough surface, there will not be anything for the UV resin layer to adhere to. Stalo se, že pří tisku se plech posouval do jedné strany a tisky byly šikmé, dlouho jsem hledal odpověď proč se to děje a nakonec jsem dospěl k názoru že díky rozdělení ploch na jednu stranu, se folie odlepuje postupně z jedné strany na druhé a tak svislý tah Z je nerovnoměrný a plech se postupně posouvá do strany. I have not needed to add the shim as the spring in the build plate can easily cater for the extra thickness. This makes it easier to remove prints without possibly causing the build plate to become un-leveled.So this time I turned the flex plate round so the 2 little tabs were to the rear, re levelled and tried again, SUCCESS seems with the VAT in the correct place with the thumbs screws in the dimples on the VAT the print head isn't dead centre and the TABS were catching on the VAT, Tried it with the original VAT and it was the same the TABS need to be at the back of the build plate. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. Simply align the magnetic sticker, remove the paper backing from the adhesive, and attach the magnet to the build plate. I've been using this for over a week now and one thing I am noticing is that the metal sheet warps and lifts from the magnetic sheet. Our build plate features an oxidized sandblasted surface for stronger model adhesion, ensuring a higher printing success rate and easy printed model removal.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop